To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024232
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000354
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000341
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000319
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000341
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000319
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000341
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000319
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03024232
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000334
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000014
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000050
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000062
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000026
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000002
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000002
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000002
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000038
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03000026
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03000002
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000026
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000014
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000050
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000038
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000026
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000014
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000327
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000317
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000347
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000062
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024886
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000334
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000062
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000334
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000317
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000050
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000038
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14024886
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000327
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000327
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000317
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000029
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000029
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03000029
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000029
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000315
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000315
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)
Copyright, 2016, OECD. Reprinted with permission. All OECD data should be cited as follows: OECD (2010), "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date)