Skip to main content
  • Percent, Annual, Not Seasonally Adjusted

    This series was constructed by the Bank of England as part of the Three Centuries of Macroeconomic Data project by combining data from a number of academic and official sources. For more information, please refer to the Three Centuries spreadsheet at https://www.bankofengland.co.uk/statistics/research-datasets. Users are advised to check the underlying assumptions behind this series in the relevant worksheets of the spreadsheet. In many cases alternative assumptions might be appropriate. Users are permitted to reproduce this series in their own work as it represents Bank calculations and manipulations of underlying series that are the copyright of the Bank of England provided that underlying sources are cited appropriately. For appropriate citation please see the Three Centuries spreadsheet for guidance and a list of the underlying sources.

  • Percent, Monthly, Seasonally Adjusted

    This series was constructed by the Bank of England as part of the Three Centuries of Macroeconomic Data project by combining data from a number of academic and official sources. For more information, please refer to the Three Centuries spreadsheet at https://www.bankofengland.co.uk/statistics/research-datasets. Users are advised to check the underlying assumptions behind this series in the relevant worksheets of the spreadsheet. In many cases alternative assumptions might be appropriate. Users are permitted to reproduce this series in their own work as it represents Bank calculations and manipulations of underlying series that are the copyright of the Bank of England provided that underlying sources are cited appropriately. For appropriate citation please see the Three Centuries spreadsheet for guidance and a list of the underlying sources.

  • Percent, Monthly, Seasonally Adjusted

    Series Is Presented Here As Three Variables--(1)--Seasonally Adjusted Data, 1929-1942 (2)--Seasonally Adjusted Data, 1940-1946 (3)--Original Data, 1947-1966. Source: National Industrial Conference Board, Published By G.H. Moore, Business Cycle Indicators, Vol. Ii, P. 35 And 123. This NBER data series m08292a appears on the NBER website in Chapter 8 at http://www.nber.org/databases/macrohistory/contents/chapter08.html. NBER Indicator: m08292a

  • Percent, Monthly, Seasonally Adjusted

    Series Is Presented Here As Three Variables--(1)--Seasonally Adjusted, 1929-1942 (2)--Seasonally Adjusted, 1940-1946 (3)--Original Data, 1947-1966. Data Are Unemployment Expressed As A Percentage Of The Civilian Labor Force. Source: United States Bureau Of The Census, Current Population Reports: Labor Force Series P-50, Nos. 2, 13, And 19 (1940-1946, 1947-1948, And 1949 Annual Reports). Data Were Derived From NBER Series On Unemployment And Civilian Labor Force. This NBER data series m08292b appears on the NBER website in Chapter 8 at http://www.nber.org/databases/macrohistory/contents/chapter08.html. NBER Indicator: m08292b

  • Percent, Quarterly, Seasonally Adjusted

    Series Is Presented Here As Three Variables--(1)--Seasonally Adjusted, 1929-1942 (2)--Seasonally Adjusted, 1940-1946 (3)--Original Data, 1947-1966. Data Are Unemployment Expressed As A Percentage Of The Civilian Labor Force. Source: United States Bureau Of The Census, Current Population Reports: Labor Force Series P-50, Nos. 2, 13, And 19 (1940-1946, 1947-1948, And 1949 Annual Reports). Data Were Derived From NBER Series On Unemployment And Civilian Labor Force. This NBER data series q08292b appears on the NBER website in Chapter 8 at http://www.nber.org/databases/macrohistory/contents/chapter08.html. NBER Indicator: q08292b

  • Percent, Monthly, Not Seasonally Adjusted

    Series Is Presented Here As Three Variables--(1)--Seasonally Adjusted, 1929-1942 (2)--Seasonally Adjusted, 1940-1946 (3)--Original Data, 1947-1966. Beginning In April 1962 Labor Force Estimates Are Based On The 1960 Population Census. Source: Employment And Earnings And Monthly Report On The Labor Force, Vol. 13, No. 9, March 1967. This NBER data series m08292c appears on the NBER website in Chapter 8 at http://www.nber.org/databases/macrohistory/contents/chapter08.html. NBER Indicator: m08292c

  • Percent, Monthly, Seasonally Adjusted

    These Figures Represent The Number Of Persons Unemployed Less Than Five Weeks Expressed As The Per Cent Of The Total Civilian Labor Force (Derived By NBER). Beginning In 1960 The Data Include Alaska And Hawaii. Population Data From The 1960 Census Were Introduced In April 1962. This Resulted In A Slight Reduction In Labor Force Totals, But None In The Estimate Of Unemployment. Population Data From The 1950 Census Were Used Prior To April 1962. Source: Bureau Of Labor Statistics, "Unemployment And Earnings" And "Monthly Report On The Labor Force, " February 1967, "Civilian Labor Force, " And "Unemployed Less Than Five Weeks" For Data Through 1966 And Subsequent Issues Of The Combined Report Thereafter. Figures May Be Derived From Bls Press Releases On The Employment Situation. This NBER data series m08318 appears on the NBER website in Chapter 8 at http://www.nber.org/databases/macrohistory/contents/chapter08.html. NBER Indicator: m08318

  • Percent, Monthly, Seasonally Adjusted

    These Figures Represent The Number Of Persons Unemployed For 5 To 14 Weeks Expressed As The Per Cent Of The Total Civilian Labor Force (Derived By NBER). Beginning In 1960, The Data Include Alaska And Hawaii. Population Data From The 1960 Census Were Introduced In April 1962. This Resulted In A Slight Reduction In Labor Force Totals, But None In The Estimates Of Unemployment. Population Data From The 1950 Census Were Used Prior To April 1962. Source: Bureau Of Labor Statistics, "Employment And Earnings" And "Monthly Report On The Labor Force, " February 1967, Pp. 35 And 40, And Subsequent Issues. This NBER data series m08319 appears on the NBER website in Chapter 8 at http://www.nber.org/databases/macrohistory/contents/chapter08.html. NBER Indicator: m08319

  • Percent, Monthly, Seasonally Adjusted

    These Figures Represent The Number Of Persons Unemployed 15 Weeks And Over As A Per Cent Of The Total Civilian Labor Force. Beginning In 1960, Data Include Alaska And Hawaii. Population Data From The 1960 Census Were Introduced In April 1962. This Resulted In A Slight Reduction In Labor Force Totals, But None In The Estimates Of Unemployment. Population Data From The 1950 Census Were Used Prior To April 1962. Source: Bureau Of Labor Statistics, Monthly Report On The Labor Force, March, 1969, P. 161, For 1948-1968 Data, And Subsequent Issues Of Monthly Report On The Labor Force Thereafter. This NBER data series m08320 appears on the NBER website in Chapter 8 at http://www.nber.org/databases/macrohistory/contents/chapter08.html. NBER Indicator: m08320

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024887

  • Percent, Monthly, Not Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024232

  • Percent, Monthly, Not Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000334

  • Percent, Monthly, Not Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000327

  • Percent, Monthly, Not Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000317

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000199

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000089

  • Percent, Monthly, Not Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000050

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000037

  • Percent, Monthly, Not Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000026

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000327

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000182

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000152

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000050

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000062

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000061

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000091

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000038

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000334

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000317

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000154

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000086

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000013

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14024886

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000341

  • Percent, Monthly, Not Seasonally Adjusted

    View data of the unemployment rate, or the number of people 16 and over actively searching for a job as a percentage of the total labor force.

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000024

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000060

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000012

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04032229

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000001

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000097

  • Percent, Monthly, Not Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000002

  • Percent, Monthly, Seasonally Adjusted

    View data of the unemployment rate, or the number of people 16 and over actively searching for a job as a percentage of the total labor force.

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000060

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000024

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000002

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000001

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000012

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14024887

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000036

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14024230

  • Percent, Monthly, Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000026

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000061

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000048

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000048

  • Percent, Monthly, Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000037

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024885

  • Percent, Monthly, Not Seasonally Adjusted

    The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024230

  • Percent, Monthly, Not Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000347

  • Percent, Monthly, Not Seasonally Adjusted

    To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000341


Subscribe to the FRED newsletter


Follow us

Back to Top