To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000002

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000032

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000026

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000029

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000315

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000035

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: ISR All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRUN74FE OECD unit ID: STSA OECD country ID: TUR All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000062

• Percent, Monthly, Not Seasonally Adjusted

The unemployment rate represents the number unemployed as a percent of the labor force. To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper).

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000014

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04073766

• Percent, Monthly, Not Seasonally Adjusted

The unemployment rate represents the number unemployed as a percent of the labor force. To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper).

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: AUS All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHU24FE OECD unit ID: STSA OECD country ID: POL All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04027681

OECD descriptor ID: LRUN25FE OECD unit ID: STSA OECD country ID: USA All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: NOR All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: ITA All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: CHL All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: ESP All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRUN74FE OECD unit ID: STSA OECD country ID: RUS All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04073397

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04073415

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04076985

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: PRT All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: MEX All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: FRA All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

• Percent, Annual, Not Seasonally Adjusted

OECD descriptor ID: LRHUTTFE OECD unit ID: ST OECD country ID: DEU All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

• Percent, Annual, Not Seasonally Adjusted

OECD descriptor ID: LRHUTTFE OECD unit ID: ST OECD country ID: CHL All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

• Percent, Annual, Not Seasonally Adjusted

OECD descriptor ID: LRHUTTFE OECD unit ID: ST OECD country ID: AUS All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: ISL All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

• Percent, Annual, Not Seasonally Adjusted

OECD descriptor ID: LRHUTTFE OECD unit ID: ST OECD country ID: ESP All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: TUR All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

• Percent, Annual, Not Seasonally Adjusted

OECD descriptor ID: LRHUTTFE OECD unit ID: ST OECD country ID: CHE All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

• Percent, Annual, Not Seasonally Adjusted

OECD descriptor ID: LRHUTTFE OECD unit ID: ST OECD country ID: BEL All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

• Percent, Annual, Not Seasonally Adjusted

OECD descriptor ID: LRHUTTFE OECD unit ID: ST OECD country ID: AUT All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: JPN All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: SWE All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: POL All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: LUX All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000334

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000317

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000346

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000327

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000354

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14024886

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04015349

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000351

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000340

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000313

• Percent, Monthly, Not Seasonally Adjusted

OECD descriptor ID: LRHUTTFE OECD unit ID: ST OECD country ID: SVN All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: GRC All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: IRL All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

OECD descriptor ID: LRHUTTFE OECD unit ID: STSA OECD country ID: HUN All OECD data should be cited as follows: OECD, "Main Economic Indicators - complete database", Main Economic Indicators (database),http://dx.doi.org/10.1787/data-00052-en (Accessed on date) Copyright, 2016, OECD. Reprinted with permission.

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000341

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000319

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000352

• Percent, Monthly, Not Seasonally Adjusted

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000332