View data of the unemployment rate, or the number of people 16 and over actively searching for a job as a percentage of the total labor force.
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000000 The Unemployment Level is the aggregate measure of people currently unemployed in the US. Someone in the labor force is defined as unemployed if they were not employed during the survey reference week, were available for work, and made at least one active effort to find a job during the 4-week survey period. The Unemployment Level is collected in the CPS and published by the BLS. It is provided on a monthly basis, so this data is used in part by macroeconomists as an initial economic indicator of current trends. The Unemployment Level helps government agencies, financial markets, and researchers gauge the overall health of the economy. Note that individuals that are not employed but not actively looking for a job are not counted as unemployed. For instance, declines in the Unemployment Level may either reflect movements of unemployed individuals into the labor force because they found a job, or movements of unemployed individuals out of the labor force because they stopped looking to find a job. For more information, see: U.S. Bureau of Labor Statistics, CES Overview (https://www.bls.gov/web/empsit/cesprog.htm) U.S. Bureau of Labor Statistics, BLS Handbook of Methods: Chapter 2. Employment, Hours, and Earnings from the Establishment Survey (https://www.bls.gov/opub/hom/pdf/ces-20110307.pdf)
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000002
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000001
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000001
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000334
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000317
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000164
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000012
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03008397
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03000012
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13025703
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000060
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000048
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000012
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03008636
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000062
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03008876
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04032229
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000049
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13024230
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000327
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000093
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000088
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000038
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000025
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000014
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000182
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03000025
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000341
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000319
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000173
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000152
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000086
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13008517
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03025702
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03024230
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03008517
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000334
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000317
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000154
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000089
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000048
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000036
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000026
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000013
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000086
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000173
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03025670
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000062
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000014
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU03000060
View data of the unemployment rate, or the number of people 16 and over actively searching for a job as a percentage of the total labor force.
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000024
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13008275
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13008636
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13025670
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS13000002
The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000091
To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000038